UNI
Eurolux-BAV Vacuum-processing system Type A-700
For ketchup, mayonnaise, dressing, mustard
(without storage container - at an additional cost)
Semi-automatic / fully automatic
Performance depending on the process technology
NEW / as good as new
Eurolux-BAV Vacuum-processing system Type A-700
UNI 172-446
Container capacity: 700 liters
Batch size: 200 - 550 liters
Cold production: output approx. 3-4 batches / hour.
Pressure resistance: vacuum-proof -1 bar / + 1.5 bar
Bottom design: cone
Tank inlet: DN 65 right-angled, left (threaded connector DIN 11851)
Container outlet: DN 125 (flange firmly screwed)
Pressure relief valve: DN 25
Product area: food
Product contact: V4A AISI 316 (1.4571)
Surface quality: sanded, grain 240
Seal quality: EPDM
Extras / surcharge: 1) Kieselmann valves, surcharge depending on the
type of equipment, see price list
Fittings: DIN 11851
Operation voltage: 400 volts, 50HZ, 3 phases N, P, PE
Control voltage: 24V DC
Air connection: ¼ “5-6 bar
Homogenizer: type Eurolux 22 kW 3000 RPM
Vacuum system: 1.5 kW
Agitator: 2.3 kW 10-40 rpm
Inlet nozzle right: DN 50
Inlet nozzle left: DN 50
Floor drains: 2 pieces DN 50
hand flaps with blind caps
Residual drain: DN 50 with disc valve and blind cap
Connection on the pressure side: DN 65 threaded nozzle DIN 11851
Connection suction side: DN 120 flange screwed
Homogenizer inlets mixing chamber
Rotor: 10 x 15 mm
Stator: 30 x 4 mm
Connection left: DN 50 disc valve
Connection on the right: DN 50 disc valve
Direct dosing water: DN 40
Direct Dosing Oil: DN 40
Bottom flow: DN 50 disc valve for CIP return
Main drive
Design: three-phase motor
Power: 22 kW
Rated speed: 2960 rpm
Protection: IP 54
Insulating material class: B
Shaft seal: GLRD / single-acting
Double sheath mixing container:
Double sheath: max.3 bar
Insulation sheath: 50 mm rock wool for heating or cooling with steam
or water, etc. without valve
Lid
Seal design: Profile seal (standard) EPDM
Pressure resistance: vacuum-resistant - 1 bar
Lid: 1 sight glass NW 125 with wiper and lamp, 3 supports for CIP nozzles
Lid lifting device:
Extras / surcharge: 2) Lid lifting device,
surcharge depending on the
type of equipment, see price list
Mixer
Type: Scrape stirrer with flow breaker
Scraper: PTFE
Agitator motor
Type: Three-phase geared motor AISI 304
Power: 2.3 kW
Output speed: 10 - 40 rpm adjustable right/left-hand run
Protection: IP 54
Insulating material class: B
Painting: RAL 1013 (Pearl White)
Seal: Garlock shaft seal
Nominal size: DN 32
Pipe connections: DIN 11851
Seal quality: EPDM
Extras / surcharge: 2) Vacuum regulation
surcharge depending on the type of equipment, see price list
Pressure sensor: E + H
Control voltage: 24 V DC
Measuring range: -1 / +1.5 bar
Vacuum shut-off valve: ball check valve
Vacuum pump: water ring pump
Power: 1.5 kW
Protection class: IP 54
Insulation class: F
Maintenance unit: water control device (24V DC)
Voltage: 400V, 50Hz
Extras/ surcharges: 4) Oil Vacuum pump (low noise)
surcharge depending on the type of equipment, see price list
Re- circulation line
Pipe size: DN 65
Discharge line: DN 65 perpendicular to the mixing tank
Discharge line: DN 65 with discharge elbow at a height of approx. 165 cm
Base frame and platform
Raw frame: with cover plates
Material: V2A AISI 304 (1.4301)
Dimensions: L = 2000 mm, W = 1200 mm, H = 2200 mm
Foot design: machine feet adjustable in height
Surface treatment: glass beads blasted
Extras/ surcharges: 5) Tank 1
surcharge depending on the type of equipment, see price list
Material: AISI 316 (1.4571) Weight: 35 kg
Volume: 150 liters
Outlet: butterfly valve DN 50
Bottom design: cone
Surface quality: ground to grain 240
Attachment: on three feet
Connection line: DN 50 with hand flap
Function: Sucking in the dry matter components via vacuum
Extras/ surcharges: 6) Tank 2
surcharge depending on the type of equipment, see price list
Material: AISI 316 (1.4571) Weight: 20 kg
Volume: 100 liters
Outlet: butterfly valve DN 50
Bottom design: cone
Surface quality: ground to grain 240
Attachment: on three feet
Connection line: DN 50 with hand flap
Function: Sucking in the dry matter components via vacuum
Without scales, display, electronic connection and software.
Automatic dosing of water in homogenizer
Manuel inlet
Extras/ surcharges: 7) Dosing
surcharge depending on the type of equipment, see price list
Fully automatic dosing of a preset amount of water
via IDM (Endress + Hauser)
Automatic dosing of oil in homogenizer Dosing of oil into the homogenizer
Cleaning CIP
Extras/ surcharges: 8) CIP Nozzle for cleaning the system
surcharge depending on the type of equipment, see price list
3 CIP nozzles with CIP rotating nozzles, pneumatic valves and pipe
connections to the automatic cleaning process of the system (Lechler)
Electric control standard on / off
Control cabinet: built on the platform of the machine
Protection class: IP 54
Material: AISI 304 stainless steel
Extras / surcharge: 9) Electric control surcharge depending on the type of equipment,
see price list
Execution: Siemens PLC control Operation: via color touch panel 19 "
Price List:
|
|
|
|
|
A700 Basis price |
€ |
€ |
|
2 pieces € 4.509,00 |
16 pieces Included in Price! |
|
€ 568,00 |
€ 568,00 |
|
€ 298,00 |
Included! |
|
€ 4.016,00 |
€ 4.016,00 |
|
€ 2.403,00 |
€ 2.403,00 |
|
€ 2.133,00 |
€ 2.133,00 |
|
Without |
€ 17.145,00 |
|
€ 2.095,00 |
€ 2.095,00 |
|
€ 3.915,00 |
€ 3.915,00 |
|
included |
included |
|
Net Item 1 – 10. |
€ 172.446,00 |
188.275,00 |
|
€ 850,00/day |
€ 850,00/day |
The above price does not take into account any training or program changes (connection of additional devices).
Our prices are net, plus VAT, ex works D-97753 Karlstadt, freight cost share,
according to scope of delivery,
subject to prior sale and price changes
The delivery and business conditions listed on our homepage apply.
| Weight | 1600 | kg |
| Length | 2000 | mm |
| Capacity | 700 | L |
| Material | V4A (AISI 316) 1.4571 | |
| Width | 1200 | mm |
| Total heigth | 2200 | mm |